Green LED Strips

Green LED strips bring a botanical, calming ambiance that no other colour can match. Operating at wavelengths between 520 and 535 nm — the peak sensitivity range of the human eye — they deliver striking visual impact while keeping energy consumption remarkably low. At GP Trader we source binned SMD 2835 and 5050 chips to ensure perfect colour consistency across every reel.

Where Green LED Strips Excel

Green light is surprisingly versatile once you look beyond the obvious. Designers and installers across Europe choose it for projects that demand a connection with nature, wellness or safety.

• Vertical gardens and biophilic lobbies — reinforces the living-wall aesthetic in hotels, coworking spaces and corporate headquarters.
• Bathrooms and spa retreats — paired with opal diffusers, green light creates a soothing, nature-inspired atmosphere linked to relaxation.
• Emergency exit and safety signage — meets European evacuation standards when embedded in technical aluminium profiles.
• Pharmacy and health-store façades — delivers the precise corporate green across entire shopfronts with zero colour drift.
• Hospitality accent lighting — juice bars, healthy-food restaurants and wellness lounges rely on green to communicate freshness.

Technical Performance and Range

We stock 60 and 120 LED/m densities in both 12 V and 24 V formats. The 24 V variants support runs of up to 10 metres with no perceptible voltage drop — essential for continuous linear features like cornices, display shelving or indoor pool perimeters.

Every strip ships with 3M VHB adhesive for reliable bonding. For humid environments such as bathrooms, covered terraces or ornamental fountains, our IP65 versions use injected silicone encapsulation that shields the circuit against condensation and splashes.

CRI sits around 70, which is optimal for monochromatic decorative lighting. When a project calls for colour transitions, these strips pair seamlessly with our RGB LED strips controlled via DMX or Wi-Fi.

Installation and Compatibility

We recommend mounting on aluminium profile whenever the strip will run for more than eight hours a day. The heatsink extends LED lifespan and improves thermal uniformity. Each strip can be cut every 5 cm (12 V) or 10 cm (24 V) without special tools.

To power your installation, browse our LED power supplies and add a 20 % headroom above the strip's nominal wattage.

Frequently Asked Questions

What wavelength do green LED strips emit?
Our green strips operate between 520 and 535 nm, the range where the human eye is most sensitive, ensuring high visibility at low power draw.

Can I install green LED strips in a bathroom?
Yes. Choose IP65-rated models for wet areas. Mount them inside an aluminium profile with a diffuser to prevent direct water contact and ensure proper heat dissipation.

What is the difference between 12 V and 24 V green strips?
24 V strips support longer single runs (up to 10 m) without brightness loss, reducing the number of power supplies needed. 12 V strips offer more frequent cut points every 5 cm.

Can green strips be combined with other colours?
Not on the same monochromatic strip. For multi-colour effects, use RGB or RGBW strips that integrate green, red and blue chips in each segment, controllable via remote or app. If you need a monochromatic strip with alternating colours, check out our Custom-Made LED Strips section.

How long do GP Trader green LED strips last?
With correct installation on aluminium profile and a properly sized driver, expected lifespan exceeds 50 000 hours — over 11 years at 12 hours of daily use.

Green LED strip 12V vs 24V: which to choose?

Choosing between a 12V and a 24V green LED strip depends on continuous run length, desired cut interval and the type of linear installation. The table below compares both variants with real specs from the GP Trader catalogue.

Green LED strip technical specs

Dominant wavelength

520-535 nm (pure monochromatic green)

Available voltages

12VDC and 24VDC

LED density

60 LED/m and 120 LED/m

Chip

SMD 2835 and SMD 5050 binned

Power draw

4.8 W/m (60 LED) and 9.6 W/m (120 LED)

Luminous flux

350-450 lm/m depending on density

Beam angle

120°

Ingress protection

IP20 indoor · IP65/IP67 outdoor and wet

Adhesive

3M VHB high-tack

Lifespan

50,000 hours

Warranty

3-year GP Trader

Lighting for vertical gardens and stair treads

Green LED strip is the natural choice to enhance the botanical effect in biophilic installations and to signpost vertical routes without glare. These are the two applications where it stands out:

• Vertical gardens: install 24V IP65 strips on aluminium profile at the top of each planted tier. The 525 nm wavelength visually enhances the lush tones of the foliage without altering plant growth.
• Stair-tread and step lighting: 12V IP20 60 LED/m strip housed in a recessed profile beneath each nosing. Green provides gentle, non-dazzling night-time signage with lower visual load than cool white.
• Indoor pool perimeters: 24V IP67 strip in a continuous cornice around the pool, with no splices required on runs up to 10 metres.
• Spa and wellness cornices: 24V IP65 strip with opal diffuser to achieve a smooth, dot-free line of green light.

For any of these applications size the driver with 20 % headroom above total load and use aluminium profile with proper heat dissipation whenever daily use exceeds 8 hours.