E1-TS Paste-Anywhere Touch & Hand Sweep Sensor 5-24V 4A
More compact 2-in-1 sensor (Ø35 × 7 mm): works as touch at 0-1 cm or hand sweep at 3-4 cm and sticks to any surface. 5-24V DC, 4 A, up to 96 W.
How it works
- Touch mode (0-1 cm) or hand-sweep mode (3-4 cm).
- 1 s soft on and 2 s soft off.
- Selectable PWM frequency: 500 Hz / 2 kHz / 4 kHz.
- Up to 4 A: more power than E1-T/E1-W with a smaller diameter.
- Reverse polarity protection.
Technical data
- Voltage: 5-24V DC (head: 5V from E1-L)
- Current / power: 4 A · 20-96 W
- Detection: 0-1 cm touch / 3-4 cm sweep
- Dimensions: Ø35 × 7 mm
- Cable: 1 m
- Protection: Reverse polarity
- Temperature: -20 °C … +55 °C
- Standards: CE · RoHS · EN 61347 · EN 55015
- Reference: E1-TS(D) / E1-TS(L) / E1-TS
- Warranty: 3 years
Versions
- DC 5.5×2.1 connector (E1-TS(D)): female DC input from the power supply and male DC output to the strip; plugs in without cutting cables.
- Dupont connector (E1-TS(L)): male Dupont input and female Dupont output, for furniture wired with Dupont connectors.
- 5V head for E1-L (E1-TS): 5V head with 1 m cable and 3-pin connector; it does not drive the strip directly and requires the E1-L dimmer.
Installation
Install with power off and by qualified personnel. Connect the constant-voltage power supply to the input and the single-colour LED strip to the output; total strip current must not exceed the maximum. The 5V head version plugs into the probe port of the E1-L dimmer.
Applications
Kitchen and bathroom furniture, shelving, display cases and projects with little space or needing more power on a single sensor.
Reservation terms
Indivisible pack of 25 units, up to 50 units, 20% deposit and manufacturing and delivery in 25-30 calendar days. 3-year warranty.
FAQ
Do I need to drill to install the E1-TS?
No. It sticks with the base adhesive to any smooth surface: wood, melamine, glass or metal.
Which version should I choose?
DC if your power supply and strip use a 5.5×2.1 jack; Dupont if the furniture uses Dupont connectors; 5V head only if you already have the E1-L dimmer.
How is it sold?
Indivisible pack of 25 units, up to 50 units, 20% deposit and manufacturing and delivery in 25-30 calendar days. 3-year warranty.




